Safety & Handling

Poynt Smart Terminal Model P3303 & P3303-X

WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injuries, or damage to your Poynt Smart Terminal or other property. Read all safety information below before using your Poynt Smart Terminal.

Handling. Handle your Poynt Smart Terminal with care. Set up your Poynt Smart Terminal on a stable work surface that allows for adequate air circulation under and around the terminal. Poynt Smart Terminal can be damaged if dropped, punctured, or crushed, or if it comes in contact with liquid. Don’t use a damaged Poynt Smart Terminal as it may cause injury.

Wet Environmental Condition. Keep your Poynt Smart Terminal away from sources of liquid, such as drinks, sinks, and so on. Protect your Poynt Smart Terminal from dampness or wet weather, such as rain, snow, and fog.

Repairing. Your Poynt Smart Terminal doesn’t have any user-serviceable parts. Do not open or disassemble or attempt to repair it or replace any components. If your Poynt Smart Terminal needs service, is damaged, malfunctions, or comes in contact with liquid, contact Poynt. If you attempt to open it, you risk damaging your Poynt Smart Terminal.

Caution: The Poynt Smart Terminal has a built-in thermal printer that will generate heat during operation. The Hot Surface label is located inside the printer door. Refrain from touching this area and the surrounding area until area has cooled.

Failure to follow instructions and properly set up, use, and care for this product can increase the risk of serious injury or damage to the device or devices.

Operating Environment:

  • Voltage: AC input 100 – 240 VAC, 50/60 Hz; DC output 12V 3.33A
  • Operation: 0° to 40°C, 90% Maximum non-condensing up to 45°C

Power Adapter. To operate the power adapter safely and reduce the possibility of heat-related injury or damage, plug the power adapter directly into a power outlet. Do not use the power adapter in wet locations or handle the power adapter with wet hands. If debris gets onto the power port, remove it gently with a dry cotton swab.

Disconnect the power adapter and any cables if any of the following conditions exists:

  • The power cord or plug becomes frayed or otherwise damaged.
  • The power adapter is exposed to rain, excessive moisture, or liquid spilled into the case.
  • The power adapter has been dropped, the case has been damaged, or you suspect that service or repair is required.

Power adapter specifications:

  • Frequency: 50 to 60Hz
  • Input Voltage: 100 to 240 Vac.
  • Output Voltage: 12.0V, 3.33A

Poynt 5

WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injuries, or damage to your Poynt 5 or other property. Read all safety information below before using your Poynt 5.

Handling. Handle your Poynt 5 with care. Set up your Poynt 5 on a stable work surface that allows for adequate air circulation under and around the terminal. Poynt 5 can be damaged if dropped, punctured, or crushed, or if it comes in contact with liquid. Don’t use a damaged Poynt 5 as it may cause injury.

Wet Environmental Condition. Keep your Poynt 5 away from sources of liquid, such as drinks, sinks, and so on. Protect your Poynt 5 from dampness or wet weather, such as rain, snow, and fog.

Repairing. Your Poynt 5 doesn’t have any user-serviceable parts. Do not open or disassemble or attempt to repair it or replace any components. If your Poynt 5 needs service, is damaged, malfunctions, or comes in contact with liquid, contact Poynt. If you attempt to open it, you risk damaging your Poynt 5.

Failure to follow instructions and properly set up, use, and care for this product can increase the risk of serious injury or death, or damage to the device or devices.

Operating Environment:

Voltage: AC input 100 – 240 VAC, 50/60 Hz; DC output 5V 2A

Operation: 0° to 40°C, 90% Maximum non-condensing up to 45°C

USB-C Power Adapter. To operate the USB-C Power Adapter safely and reduce the possibility of heat-related injury or damage, do one of the following: Plug the USB-C Power Adapter directly into a power outlet. If you’re using the Power Adapter Extension Cable, place the power adapter on a desk, table, or location that is well-ventilated.

Don’t use a power adapter in wet locations or handle the power adapter with wet hands. Disconnect the power adapter and any cables if any of the following conditions exists: The power cord or plug becomes frayed or otherwise damaged. Your Poynt or USB-C Power Adapter is exposed to rain, excessive moisture, or liquid spilled into the case. Your Poynt or USB-C Power Adapter has been dropped, the case has been damaged, or you suspect that service or repair is required.

If debris gets onto the power port, remove it gently with a dry cotton swab.

USB-C Power Adapter specifications:

  • Frequency: 50 to 60Hz.
  • Input Voltage: 100 to 240 Vac.
  • Output Voltage: 5.0V, 2A